Leica Geosystems

Leica Lino L6Rs-1 Self-Levelling 3×360° Line Laser, Red beam

MPN#: 918976
-10%
Click to enlarge
Leica Geosystems

Description

PRECISION ALIGNMENT RED MULTI-LINE LASER, 3x360° HIGHLY VISIBLE RED LASER LINES, Three 360° thin, crisp and clearly visible red laser lines, two vertical, and one horizontal, which are exactly at the right angle (90°) to one another
  • Horizontal and two vertical 360° red laser lines
  • High visibility due to red Ultra-power laser diodes
  • Self-levelling over wide range
  • Fixed plumb point due to integrated base
  • Adjustable strength of laser lines
  • Operating range of up to 25 m
  • Li-Ion power for up to 36 h operation
  • Uninterrupted working with Triple-Power concept
  • Smart magnetic adapters for easy positioning
More Product DetailsWhat's Included

Select Package

Clear
Compare
Add to wishlist
Add to quote
free shipping
Ships Out within: 24-48 Hours
Overview

MULTI-DIRECTIONAL ALIGNMENT
You can position the cross section (plumb point) of the two vertical laser lines where it is required and then rotate the two horizontal laser lines by ± 10° while the position of the plumb point stays in place. This allows you to position the laser lines of the Lino L6R much faster.

PREFERRED SETTINGS
You can individually select each red 360° laser line and its power mode to be turned on or off when the device starts up; meaning your 3×360° laser remembers your preferred settings on set up.
SELF-LEVELING
The Lino L6R is a self-levelling multi- line laser. This means it automatically adjusts its positioning up to ± 4° when slightly out of level and no manual alignment is needed.
Li-Ion Innovative
Li-Ion power lasts for hours. There is no interruption to your work for battery charging and no need to constantly exchange Alkaline batteries.
Preferred Settings
Save your laser line settings and their intensity on the device so it is ready to use when it’s turned on.
Continuous Working
Run your laser with Li-Ion, Alkaline or connect it to the power supply. Continue working with the smart triple power concept.
Rugged Design
The Leica Linos are dust and spray water protected. This makes them tough instruments suitable for today’s jobsite conditions
Smart Accessories for Highest Flexibility
Easy set-up
The vertical laser lines projected to walls and ceilings are easily adjusted once the plumb point is set. The integrated base of the line laser allows you to position the cross section (plumb point) of the two vertical laser lines where required and then adjust the laser lines by ± 10° while keeping the position of the plumb point
Magnetic adapters
Magnetic adapters allow you to position the instrument quickly and with absolute precision. Set-up the rotatable adapters over edges and profiles, attach it to iron pipes or various tracks and bars. The triple power concept allows for continuous operation of the line laser. It can be operated with Li-Ion and Alkaline batteries or alternatively with its charger.

In The Box
  • Lino L6Rs-1
  • Quick start guide
  • Soft bag
  • 3 AA batteries
  • Laser target
  • Safety instructions
  • Calibration certificate
  • Warranty card
Specification
  • Beam horizontal: 360°
  • Beam vertical: 2 x 360°
  • Intersection points: up, down, right, left, front, back (90° / 180°)
  • Range / diameter: 25 m / 50 m (82 ft / 164 ft)
  • Range / diameter: with Leica RGR 200 receiver 70 m / 140 m (230 ft / 460 ft)
  • Levelling accuracy: ± 0.2 mm/m (± 0.002 in/ft)
  • Horizontal- and vertical line accuracy: ± 0.3 mm/m (± 0.004 in/ft)
  • Intersection point accuracy: ± 0.2 mm/m (± 0.002 in/ft)
  • Self-levelling range: ± 4°
  • Self-levelling time: 3 sec
  • Fine adjustment: ± 10° around vertical intersection point
  • Out-of-level warning: yes- blink lines every 5 s
  • Levelling: pendulum (lockable)
  • Laser: 635 nm / class 2 (acc. to IEC 60825-1)
  • Protection class: IP54 (dust and splash water)
  • Battery type: Lino Li-Ion battery pack 5200 mAh / 18.7 Wh or 3 x AA Alkaline
  • Laser line intensity selectable: 100 %, 75 %, 50 %
  • Operating time: with Li-Ion optional up to 36 h (3 beam, 50 % power)
  • Operating time: with Alkaline up to 25 h (3 beam, 50 % power)
  • Dimensions: 124 x 107 x 154 mm (4.88 x 4.21 x 6.06 in)
  • Weight: 781 g (1.71 lbs)
  • Operation temperature: -10 to +50° C (14 to 122° F)
  • Storage temperature: -25 to +70° C (-13 to +158° F)
  • Laser line width: @ 5 m (16.4 ft) distance < 2 mm (< 0.08 in)
  • Tripod thread: 1/4 in (5/8 in with adapter) #3Pulse power for receiver: yes
Customer Review

Reviews

There are no reviews yet.

Be the first to review “Leica Lino L6Rs-1 Self-Levelling 3×360° Line Laser, Red beam”

Your email address will not be published. Required fields are marked *

Shipping & Returns
Shipping Policy:- Our shipping rates are automatically calculated during checkout for orders that we are charging shipping.
Return Policy:- We believe that in order to have the best possible online shopping experience, our customers should be 100% satisfied with their purchase. So, if you're not happy with your purchase for any reason, just go through our easy RMA self-service process. You will receive A RMA Number with return instructions.