877-622-3511
M-F 9AM EST - 5PM FRI 9AM
EMAIL US
SEND US YOUR FEEDBACK
Live Chat
M-F 9AM EST - 5PM FRI 9AM
Location
249 NY-32, Central Valley, NY 10917
Reflective Targets
Target-Smart, Grey
24-48 Hours
The RS60 markers can be used in a variety of situations. Inside buildings, heights and axes are clearly documented. The transfer of axes to the next floor can be done easily and accurately by means of laser or plumb line to stairwells or other openings. Outdoors they can be fastened permanently to any desired point. There they can be used for the positioning with the tachymeter or are used as a batter board or for securing the height and axis. If the markers are fastened to the facade, surveyors and foremen can continue to use them during construction. Facade subcontractors can use them to measure glass or natural stone facades, or as needed. They are also great for 3-dimensional observation of facades, bridges and bulkheads, etc.
RS60-R Smart Marker w/40 MM Target, Red
24-48 Hours
The RS60 markers can be used in a variety of situations. Inside buildings, heights and axes are clearly documented. The transfer of axes to the next floor can be done easily and accurately by means of laser or plumb line to stairwells or other openings. Outdoors they can be fastened permanently to any desired point. There they can be used for the positioning with the tachymeter or are used as a batter board or for securing the height and axis. If the markers are fastened to the facade, surveyors and foremen can continue to use them during construction. Facade subcontractors can use them to measure glass or natural stone facades, or as needed. They are also great for 3-dimensional observation of facades, bridges and bulkheads, etc.
RS80-G Smart Angle Marker w/40MM Target, Grey
24-48 Hours
The RS80 markers are used when difficult measuring positions would make it impossible to sight on the reference points. These markers are installed in “roof-shape” . To observe facades and other points, these markers are very well suited as corner solutions. If heights and axis must be transferred from the outside to the inside and vice versa, the markers can be installed, for example, in the window jamb. You can then literally measure around corners.
RS80-R Smart Angle Marker w/40MM Target, Red
24-48 Hours
The RS80 markers are used when difficult measuring positions would make it impossible to sight on the reference points. These markers are installed in “roof-shape” . To observe facades and other points, these markers are very well suited as corner solutions. If heights and axis must be transferred from the outside to the inside and vice versa, the markers can be installed, for example, in the window jamb. You can then literally measure around corners.
Target-Stake Out Aid, Foldable
24-48 Hours
Stake-out aids RS96 was developed specifically for stake-out work on the batter board and on a floor slab. Exact measuring of the survey point on the floor slab often causes major problems particularly in the “final phase” with the last 5-10 cm. The work is very time-consuming due to the continual side to side, backwards and forwards with the prism pole and the prism pole always has to be exactly plumb. Foldable stake-out aid is placed on the ground, and the assistant can use the measuring scales to reproduce and transfer the surveyor’s directions quickly and precisely.
RSAK130-G Plate with Angle and 2 Target Reflectors 30×30 mm, Grey
24-48 Hours
The RSAK130 is used on rails, bridges, noise barrier tunnels, dams, buildings, supports, high-bay shelves, glass and natural stone façades, etc. At a well-planned installation, adapters that are equipped with pre-installed smart angle targets permit access to the surveying point from almost any position. On railway tracks, for example, the surveyor no longer needs to put himself in danger, but can perform his measurements from a safe position at any time. These targets can potentially eliminate dangerous and expensive road blocks that are no longer necessary, since many measurements can be simplified considerably. 3-dimensional observations are ensured by XYZ coordinates. The targets are fitted vertically to the axis in lift shafts. The axes are clearly visible from any position for all workers.
RSAK130-R Plate with Angle and 2 Target Reflectors 30×30 mm, Red
24-48 Hours
The RSAK130 is used on rails, bridges, noise barrier tunnels, dams, buildings, supports, high-bay shelves, glass and natural stone façades, etc. At a well-planned installation, adapters that are equipped with pre-installed smart angle targets permit access to the surveying point from almost any position. On railway tracks, for example, the surveyor no longer needs to put himself in danger, but can perform his measurements from a safe position at any time. These targets can potentially eliminate dangerous and expensive road blocks that are no longer necessary, since many measurements can be simplified considerably. 3-dimensional observations are ensured by XYZ coordinates. The targets are fitted vertically to the axis in lift shafts. The axes are clearly visible from any position for all workers.
RSAK80-G Carrier Plate with screwed Angle Target RS80, Grey
24-48 Hours
The RSAK80 is used on rails, bridges, noise barrier tunnels, dams, buildings, supports, high-bay shelves, glass and natural stone façades, etc. At a well-planned installation, adapters that are equipped with pre-installed smart angle targets permit access to the surveying point from almost any position. On railway tracks, for example, the surveyor no longer needs to put himself in danger, but can perform his measurements from a safe position at any time. These targets can potentially eliminate dangerous and expensive road blocks that are no longer necessary, since many measurements can be simplified considerably. 3-dimensional observations are ensured by XYZ coordinates. The targets are fitted vertically to the axis in lift shafts. The axes are clearly visible from any position for all workers.
RSAK80-R Carrier Plate with screwed Angle Target RS80, Red
24-48 Hours
The RSAK80 is used on rails, bridges, noise barrier tunnels, dams, buildings, supports, high-bay shelves, glass and natural stone façades, etc. At a well-planned installation, adapters that are equipped with pre-installed smart angle targets permit access to the surveying point from almost any position. On railway tracks, for example, the surveyor no longer needs to put himself in danger, but can perform his measurements from a safe position at any time. These targets can potentially eliminate dangerous and expensive road blocks that are no longer necessary, since many measurements can be simplified considerably. 3-dimensional observations are ensured by XYZ coordinates. The targets are fitted vertically to the axis in lift shafts. The axes are clearly visible from any position for all workers.
RSFP1 Fixed Point for Tripods, Prisms and Instruments
24-48 Hours
RSFP-X80G Adapter for Tilting Prisms and Targets
24-48 Hours
RSFP-X90 Fixpoint for Rotatable Tilting Prisms and Targets
24-48 Hours