877-622-3511
M-F 9AM EST - 5PM FRI 9AM
EMAIL US
SEND US YOUR FEEDBACK
Live Chat
M-F 9AM EST - 5PM FRI 9AM
Location
249 NY-32, Central Valley, NY 10917
Reflective Targets
1703-07 12.5mm Building MonPrism System, Mountable on Roadways
24-48 Hours
RS183-G Tilting Target 30×30 mm, Grey
24-48 Hours
RS183-R Tilting Target 30×30 mm, Red
24-48 Hours
RS193-G Rotatable Tilting Target 30×30 mm, Grey
24-48 Hours
The reflective target markers RS193 for use with tachymeter and total station. The reflective marker can always be set up accurately on the measuring instrument and rotated through a radius of 360°. Thus the same survey point can be used from all directions. When using fixed point RSFP-X90, the targets can be removed and later replaced on the same survey point. If required the specially developed protective cap RSPC10 protects the reflective mark from fouling.
RS193M-G Rotatable Tilting Target 30×30 mm Magnetic, Grey
24-48 Hours
The reflective target markers RS193 for use with tachymeter and total station. The reflective marker can always be set up accurately on the measuring instrument and rotated through a radius of 360°. Thus the same survey point can be used from all directions. When using fixed point RSFP-X90, the targets can be removed and later replaced on the same survey point. If required the specially developed protective cap RSPC10 protects the reflective mark from fouling.
RS193M-R Rotatable Tilting Target 30×30 mm Magnetic, Red
24-48 Hours
The reflective target markers RS193 for use with tachymeter and total station. The reflective marker can always be set up accurately on the measuring instrument and rotated through a radius of 360°. Thus the same survey point can be used from all directions. When using fixed point RSFP-X90, the targets can be removed and later replaced on the same survey point. If required the specially developed protective cap RSPC10 protects the reflective mark from fouling.
RS193-R Rotatable Tilting Target 30×30 mm, Red
24-48 Hours
The reflective target markers RS193 for use with tachymeter and total station. The reflective marker can always be set up accurately on the measuring instrument and rotated through a radius of 360°. Thus the same survey point can be used from all directions. When using fixed point RSFP-X90, the targets can be removed and later replaced on the same survey point. If required the specially developed protective cap RSPC10 protects the reflective mark from fouling.
RS21-R Construction Laser Target Self-Adhesive, Red
24-48 Hours
The markers RS21 are installed on an unplastered or unrendered wall to provide an unmissable datum to all tradesmen. To avoid measurement differences when transferring, the markers have a ledge to which a ruler can be applied. The elastic “stubs” ensure that the datum is stable until after plastering, and easy to find again. Heights and axes are also secured until plastering work is complete. To avoid tampering, the corners are sprayed over in colour. After completing all work, the flexible “stubs” are easily pinched off, the rework is very little, and the markers remain under the plaster as proof. We recommend gluing the markers and securing them at least once.
RS30-G Smart Target with Level, Grey
24-48 Hours
The combination markers RS30 permit documentation and permanent security of heights and axis with a single product. If different measuring devices are used at a construc- tion site, the combination markers are the best solution to avoid measuring differences. The height, axis and position number are indicated with number punch or water proof marker pen. Levelling instrument, laser, theodolites, or total station: the combined markers are the perfect surveying point for any instrument! On difficult ground, the markers are permanently fastened with adhesive, or with dowels and screws. A protrusion to which the measuring rod or a measuring slat can be applied guaran- tees precise transfer of height. Crosshairs are imprinted on the backing plate under the exact centre of each reflective target to ensure the survey point is durably marked. If the reflective target is damaged at any point, it can easily be replaced and the original survey point can be restored quickly, easily and cheaply.
RS30-R Smart Target with Level, Red
24-48 Hours
The combination markers RS30 permit documentation and permanent security of heights and axis with a single product. If different measuring devices are used at a construc- tion site, the combination markers are the best solution to avoid measuring differences. The height, axis and position number are indicated with number punch or water proof marker pen. Levelling instrument, laser, theodolites, or total station: the combined markers are the perfect surveying point for any instrument! On difficult ground, the markers are permanently fastened with adhesive, or with dowels and screws. A protrusion to which the measuring rod or a measuring slat can be applied guaran- tees precise transfer of height. Crosshairs are imprinted on the backing plate under the exact centre of each reflective target to ensure the survey point is durably marked. If the reflective target is damaged at any point, it can easily be replaced and the original survey point can be restored quickly, easily and cheaply.
Target-Smart, Red
24-48 Hours
The RS50 markers can be used in a variety of situations. Inside buildings, heights and axes are clearly documented. The transfer of axes to the next floor can be done easily and accurately by means of laser or plumb line to stairwells or other openings. Outdoors they can be fastened permanently to any desired point. There they can be used for the positioning with the tachymeter or are used as a batter board or for securing the height and axis. If the markers are fastened to the facade, surveyors and foremen can continue to use them during construction. Facade subcontractors can use them to measure glass or natural stone facades, or as needed. They are also great for 3-dimensional observation of facades, bridges and bulkheads, etc.